Max-Flow high capacity pleated stacking filter is appropriate for inside existing baskets without hardware changes. It is characterized by higher filter surface area and dirt holding capacity. The inside-out flow design and high capacity pleated stacking structure could hold 50 times higher impurities than standard bag filter.
Features & Benefits
- High surface area, high flow capacity
- Inside-outside flow configuration holds all contaminants in single ended filter.
- Shorten in downtime and easy to change out
- Available to fit most Size 1 and Size 2 bag housing without hardware changes
- All Polypropylene material provides high chemical resistance
- Cartridges are free of surfactants, resins, binders and adhesive
Operation & Conditions
- Maximum operating differential pressure: 5.1 bar ( 75 psi ) at 25°C
- Recommended change-out differential pressure: 2.4 bar (35 psi)
- Maximum operating temperature: 80°C
Applications of products
- RO Pre-Filtration
- Cooling water filtration
- Pre filters or Final filters for waste water
- Food and Beverage filtration
- Oil Filtration
Product specifications
- Micron ratings : 1, 3, 5, 10, 20, 40, 70 micron
- Material of Construction: Filter Media: Pleated Stacking Polypropylene Nonwoven fiber
- Support and Drainage: Polypropylene
- Core Material: Polypropylene
- End Cap: Polypropylene
- Length: Standard Size 1/ Standard Size 2/ 40” Length
- Outer Flange Diameter: 7″, equal to Size 1/ Size 2 Bag Filter
- Outer Diameter: 6” (152.4 mm)
- O-ring material: EPDM, Viton
Efficiency of Filtration
| Micron Rating | 3 micron | 5 micron | 10 micron | 20 micron | 40 micron | 70 micron |
|---|---|---|---|---|---|---|
| Efficiency 99% | 3 | 5 | 10 | 20 | 40 | 70 |
| Efficiency 95% | — | 3 | 5 | 10 | 20 | 30 |