Poly-Flow filter is an advanced design product that could permit high flow rate with compact design. This advantage allows fewer filter elements to accommodate to your flow requirements. Radial Pleat design enlarge the surface area, providing high loading capacity for long service life.
Features & Benefits 100% PP outside-to-inside flow radial pleat filter
- High loading capacity with lower cost filtration.
- 100% PP for compatibility with a wide rage of process fluids.
- Manufacture in clean room, high clean catridge.
- Double O-ring seal design redue the risk of fluid bypass.
Operation & Conditions large diameter pleated cartridge
- Maximum operating differential pressure:
1micron: 2.46 kg/cm2
over 2micron: 3.5 kg/cm2 - Maximum operating temperature: 80°C
- Maximum flow rating: 1&2 micron: 227 LPM ; All other micron: 302 LPM
- O-ring size: 226 O-ring
Applications of products
- Amine
- Beer and wine
- Completion fluids
- Desalination
- Edible oils
- Fructose
- Ground water clean-up
- Waste water
- Machine Coolant
- Acids and bases
- Carbon beds
- Deep wells
- Dl resins
- EDM fluids
- Glycol
Product specifications
- Micron ratings : 1, 2, 5, 10, 25, 50, 75 micron
- Material of Construction: Polypropylene Micro-fiber Meltblown
- Core Material: Polypropylene
- End Cap: Polypropylene
- O-ring material: EPDM, Buna N, Silicone, Viton, PFA encapsulated viton
- Length: 10” , 20” ,30”, 40”, 60”
Efficiency of Filtration Poly-Flow
Retention Efficiency (%)
| Micron Rating | 2 micron | 5 micron | 10 micron | 25 micron | 50 micron | 75 micron |
| Efficiency 99% | 2 µm | 5 µm | 10 µm | 25 µm | 50 µm | 75 µm |
| Efficiency 95% | — | 2 µm | 8 µm | 15 µm | 25 µm | 50 µm |
| Efficiency 90% | — | — | 5 µm | 10 µm | 20 µm | 35 µm |
| Efficiency 75% | — | — | 3 µm | 8 µm | 15 µm | 25 µm |
| Efficiency 50% | — | — | — | 5 µm | 10 µm | 15 µm |