The Multi-Flow high flow large diameter pleated filter cartridge is a high-capacity, inside-to-outside PP radial pleated cartridge designed for microelectronics, chemicals, and water processing.
Multi Flow filter is a large diameter, single opened ended horizontal pleated cartridge with an inside to outside flow pattern. The high flow filter which ensures high loading capacity for long life, lower cost filtration and stability to the flow rate. The filter is available with 20” to 80” that with one piece media, with fewer seals which reduced the risk of bypass and insure a higher quality filtration.
Features & Benefits Multi-Flow MFF Large Diameter Pleated Filter Cartridge
- Low pressure drop, high capacity of dust and long service life.
- End caps and connectors sealed by thermal bond, free of binder
- Manufature in clean room, high clean catridge.
- Inside to outside flow configuration, all contaminants held in SOE filter.
Operation & Conditions
- Maximum operating forward pressure: 3.5 kg /cm2
- Maximum operating temperature: 80°C
- Recommended flow rate in water: 50~75 m3/hr/40”
Applications of products
- Food & Beverage:
Beer, Wine, High Fructose Corn Syrup, Soft Drinks, Dairy, Juice, Bottled Water, Pre-RO - Fuels & Chemicals:
Chemical Plants, Refineries, Amines, Specialty Chemicals, Petrochemicals, Polymer, Oil Recovery, Film
and Resins - Microelectronics:
Makeup Water, Semiconductors, Microlithography, Process Chemicals. - Power Generation:
Boiler Condensate, Nuclear and Fossil Power Plants, Cogeneration, Gas Turbines - Water Processing:
Reverse Osmosis, Centralized Water Systems, Process Water, Municipalities, Desalination
Product specifications
| Micron Ratings | Absolute rating 2, 4.5, 10, 20, 40, 70, 100 micron |
|---|---|
| Material of Construction | Polypropylene Micro-fiber Meltblown |
| Core Material | Polypropylene |
| End Cap | Polypropylene |
| O-Ring Material | EPDM, Buna N, Silicone, Viton, PFA Encapsulated Viton |
| Length Options | 20″, 40″, 60″, 80″ |
| Outer Diameter | 6″ (152 mm) |
Efficiency of Filtration
Initial Pressure Drop
Ordering Information
Multi-Flow Filter Ordering Information
Part Number Code Example: MFF – 6 – 40 – PP – 045 – E
| Filter Series | Outer Diameter | Length | Material | Micron Rating | O-Ring Material |
|---|---|---|---|---|---|
| MFF Multi Flow Filter | 6 6″ (152 mm) | 20 = 20″ 40 = 40″ 60 = 60″ 80 = 80″ | PP Polypropylene | 020 = 2 µm 045 = 4.5 µm 100 = 10 µm 200 = 20 µm 400 = 40 µm 700 = 70 µm T00 = 100 µm | E = EPDM N = Buna N S = Silicone V = Viton T = PFA Encapsulated Viton |